Setting Hypoglycaemic Warning Alarms - AgaMatrix WaveSense JAZZ Owner's Manual

15
The Hypoglycaemic Warning Alarm alerts you when your glucose
test results are below the hypoglycaemic threshold you have set.
The meter is pre-set to a hypoglycaemic threshold of 3.9 mmol/L.
Always consult your healthcare professional for your recommend-
ed target ranges. When your glucose test results are below your
set hypoglycaemic threshold, the meter display will flash your
test results, the abbreviation "HYPO," time, and date repeatedly.
WARNING: Your healthcare professional should recommend
what your hypoglycaemic limit is.
[1] When your meter is deactivated, press the CHECK ( ) but-
ton once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the abbreviation "HYPO" is displayed.
[3] Press the CHECK ( ) button to enter and edit
the Hypoglycaemic Warning Alarm settings.
[4] Set the Hypoglycaemic Alarm ON or OFF
with the DOWN ( ) or UP ( ) arrow buttons.
Your selection will be highlighted by the blink-
ing of the symbol. Press the CHECK ( ) button
to confirm your selection and move on to the
hypoglycaemic threshold setting.
[5] Set the hypoglycaemic threshold (flashing)
with the DOWN ( ) or UP ( ) arrow buttons. Press the CHECK
( ) button to confirm your selection and return to the menu.
Setting Hypoglycaemic
Warning Alarms
45