Viewing Individual Results - AgaMatrix WaveSense JAZZ Owner's Manual

About averages and standard deviations:
Control solution, out-of-temperature-range results, and results
without a valid time or date are not included in averages, stan-
dard deviations and trend graphs. Hi and Lo test results will be
included in averages as values of 33.3 mmol/L and 1.1 mmol/L
respectively. 14, 30, and 90 day averages and trend graphs are
calculated by taking the average of all readings within the re-
spective time period. Standard deviations, averages and trend
graphs do not include the current day in their calculations.
The standard deviation is an expression of the variation of
readings from the average reading. The greater this value the
more variation exists between individual readings and the
average. The standard deviation feature is a way to track your
glucose variability.
10.1

Viewing Individual Results

[1] When your meter is deactivated, press the
CHECK ( ) button once to enter menu mode.
The word "MEM" is displayed.
[2] Press the CHECK ( ) button again to enter
the individual results section.
[3] Press the DOWN ( ) arrow button to
scroll through the individual readings. Press
the UP ( ) arrow button to scroll backwards.
Note: When scrolling through, the oldest test
result will cycle back to the most recent test
result. To return to the menu, press the CHECK ( ) button.
34