Setting Hyperglycaemic Warning Alarms - AgaMatrix WaveSense JAZZ Owner's Manual

16
The Hyperglycaemic Warning Alarm alerts you when your glucose
test results are above the hyperglycaemic threshold you have set.
The meter is pre-set to a hyperglycaemic threshold of 13.3 mmol/L.
Always consult your healthcare professional for your recommend-
ed target ranges. When your glucose test results are above your
set hyperglycaemic threshold, the meter display will flash your
test results, the abbreviation "HYPr," time, and date repeatedly.
WARNING: Your healthcare professional should recommend
what your hyperglycaemic limit is.
[1] When your meter is deactivated, press the CHECK ( ) but-
ton once to enter menu mode. The word "MEM" is displayed.
[2] Press the DOWN ( ) or UP ( ) arrow buttons
until the abbreviation "HYPER" is displayed.
[3] Press the CHECK ( ) button to enter and edit
the Hyperglycaemic Warning Alarm settings.
[4] Set the Hyperglycaemic Alarm ON or OFF
with the DOWN ( ) or UP ( ) arrow buttons.
Your selection will be highlighted by the
blinking of the symbol. Press the CHECK ( )
button to confirm your selection and move
on to the hyperglycaemic threshold setting.
[5] Set the hyperglycaemic threshold (flashing)
with the DOWN ( ) or UP ( ) arrow buttons. Press the CHECK
( ) button to confirm your selection and return to the menu.
46
Setting Hyperglycaemic
Warning Alarms