Caring For Your Meter And Lancing Device; Meter Specifications - AgaMatrix WaveSense JAZZ Owner's Manual

Advance blood glucose monitoring system

Hide thumbs Also See for WaveSense JAZZ:

Table of Contents

[5] Set the minute (flashing) with the DOWN ( )

or UP ( ) arrow buttons. Press the CHECK ( )

button to confirm your selection. If the meter was

activated via strip insertion, pressing CHECK ( )

allows you to perform a test. If the meter was

activated via the CHECK ( ) button, the meter will

enter menu mode.

When using your meter, avoid getting dirt, dust, blood, control

solution, water or any other liquid into the test strip port and

battery compartment. Clean the outside of the meter or the

lancing device using a cloth dampened with mild detergent

or mild soap. If you wish to clean the lancing device cap only,

remove the cap, wash it in warm water, rinse well, and dry.

CAUTION: Never immerse the meter or the body of the

lancing device in water or any other liquid solution.

Assay Method: Dynamic Electrochemistry

Maximum Altitude: 3,048 meters (10,000 feet)

Calibration: Plasma equivalent

Coding: No Code

Sample: Whole blood, capillary

Sample Size: 0.5 microliters

Average Glucose Test Time: 6 seconds

Measurement Units: mmol/L

Caring For Your

Meter and Lancing Device

Table of Contents

Show Quick Links

Table of Contents