The shock cord must be tightened if the handle does not return all the way to the
fan enclosure. To access the shock cord, you must first detach the monorail from
the front end and stand the front end upright as shown in figure #1.
1.
3.
5. Remove the Shock Cord
Adjustment Mechanisms.
(S.C.A.M.s) from the axle.
2.
4. Now turn the front end section
upside down.
ADJUSTING
THE
SHOCK CORD
Every 250
hours of use
(or monthly for
institutional
users)
Step 1
Removing
the Return
Mechanism
Cover
Step 2
Adjust
Shock Cord
23