Occasionally - Concept2 INDOOR ROWER User Manual

6.
PM3 Battery Replacement
Use 2 D(IEC LR20) batteries. (In order not to lose the date, time, language,
custom list and memory while changing the batteries, you must be sure the
PM3 is turned off and you take less than five minutes removing the old and
installing the new batteries.)
IMPORTANT:
The monitor is a sealed unit. DO NOT take apart. Any attempt to disassemble
may void warranty. Contact Concept2 for problems with this part.
Use of this machine with a worn or weakened part, such
as the chain, sprockets, swivel connector, or shock cord,
may result in injury to the user. When in doubt about the
condition of any part, Concept2 strongly advises that it be
replaced immediately. Use only genuine Concept2 parts.
Use of other parts may result in injury or poor performance
of the machine.
7 .
CAUTION
CHECK FOR
DUST IN
FLYWHEEL
continued
REPLACING
THE
BATTERIES
Approximately
every
800 hours
IMPORTANT
SAFETY
NOTE
27