Assembling & Installing The Frame Lock - Concept2 INDOOR ROWER User Manual

tool needed:
Allen Wrench (provided)
parts needed:
2 washers
2 screws
1. Insert axle through axle tube on
framelock.
2. Place framelock between
footplates on Indoor Rower. The
two footplates may need to be
pulled apart slightly for the axle
tube to fit. Be sure to line up
axle tube to orient framelock as
shown.
3. Insert 3/4" screw and washer
into each end of framelock axle
tube, through holes in footplates.
Tighten with allen wrench.
ASSEMBLING
& INSTALLING
FRAME LOCK
3/4"
or 2cm
THE
5