Throttle Cable Free Play Adjustment - Yamaha YFM250XL(C) Service Manual

3

THROTTLE CABLE FREE PLAY ADJUSTMENT

a
THROTTLE CABLE FREE PLAY
ADJUSTMENT
NOTE:
Before adjusting the throttle cable free play,
the engine idle speed should be adjusted.
1.Place the machine on a level place.
2.Check:
Throttle cable free play a
Out of specification → Adjust.
Throttle cable free play:
3 ~ 5mm (0.12 ~ 0.20 in)
3.Adjust:
Throttle cable free play
NOTE:
If the throttle cable free play can not be
adjusted on the carburetor side, adjust it on
the throttle housing side.
**********************************
Adjustment steps:
Pull back the adjuster covers 1 from the
both side (throttle housing and carburetor).
Make sure that the adjuster 2 and locknut
3 on the throttle housing side are fully
tightened.
Loosen the locknut 4 on the carburetor
side.
Turn the adjuster 5 clockwise or counter-
clockwise until the proper free play is
obtained.
Clockwise
Counterclockwise Free play is decreased.
Tighten the locknut.
Reset the adjuster covers.
3 - 14
INSP
ADJ
Free play is increased.