Yamaha YFM250XL(C) Service Manual page 385

1 Tail/brake light
2 Final gear case breather hose
3 Front brake light switch lead
4 Carburetor air vent hose
5 Rear brake breather hose
6 Rear brake cable
7 CDI magneto lead
CABLE ROUTING
È Make sure that the starter motor lead has no
slack.
É Fasten the starter motor lead and wire harness
to the frame with the plastic band.
Ê Fasten the starter motor lead and wire harness
to the frame with the plastic clamp.
Ë Route the starter motor lead, wire harness, and
battery - lead through the hole in the rear
fender.
Ì Fasten the taillight lead and wire harness to the
frame with the plastic clamp.
– 6 –
SPEC