Yamaha YFM250XL(C) Service Manual page 144

4
ENGINE ASSEMBLY AND ADJUSTMENT
6.Install:
Spring (drive pawl) 1
Drive pawl 2
Circlip 3
Spring 4
Drive plate 5
Bolt 6
NOTE:
When installing the spring (drive pawl),
align the spring end 7 with the groove a
on the sheave drum.
7.Turn the sheave drum 3-turns clockwise
to preload the starter spring.
8.Install:
Starter handle 1
Cap 2
NOTE:
Pass the rope through the case hole and
make knot 3 on the rope so that the rope
is not pulled into the case.
Untying knot 3 after making knot 4.
4 - 46
ENG