Yamaha YFM250XL(C) Service Manual page 269

REAR SHOCK ABSORBER AND SWINGARM
3.Tighten:
Pivot shafts (swingarm)
Locknut (pivot shaft)
*********************************
Pivot shaft tightening steps:
Tighten the pivot shaft 1 (left) to specifi-
cation.
Pivot shaft (left):
130 Nm (13.0 m • kg, 94 ft • lb)
Tighten the pivot shaft 2 (right) until it
contacts the collar 3.
Pivot shaft (right):
6 Nm (0.6 m • kg, 4.3 ft • lb)
Tighten the locknut 4 (right) to specifica-
tion.
Locknut (right):
130 Nm (13.0 m • kg, 94 ft • lb)
*********************************
4.Inspect:
Swingarm free play
Refer to the step 8. in the "REMOVAL"
section.
5.Lubricate:
Bushings (shock
lower)
Lithium-soap base grease
6.Install:
Shock absorber
Nut (shock absorber - upper):
50 Nm (5.0 m • kg, 36 ft • lb)
7 - 41
CHAS
absorber-upper and
7