1 Cable guide
2 Main switch
3 Fuel tank breather hose
4 Taillight
5 Final gear case breather hose
6 Carburetor overflow hose
7 Reverse switch lead
8 Neutral switch lead
9 Starter motor lead
0 Throttle cable
A Rear brake cable
CABLE ROUTING
B Rear brake breather hose
C Carburetor air vent hose
D CDI magneto lead
Å Route the main switch lead and indicator light lead to the side of
the cable guide.
ı Insert the carburetor air vent hose, rear brake breather hose, and
final gear case breather hose into the air duct after routing them
through the fuel tank grommet.
– 8 –
SPEC