Entering the Installer Menu
To enter the Installer menu, press and hold the O/RIDE button for 15 seconds. After 15
seconds the LCD will show "
Adjust this value to "
previously selected value) by using the up () or down () button. Tap the O/RIDE
button to enter the menu.
If you have entered the correct PIN you will be given the first menu option, if you have
entered an incorrect PIN you will be exited from this menu.
Using the Installer Menu
To move forward through the Installer menu items tap the "O/RIDE" button.
To move backwards through the Installer menu items tap the "PROG" button.
To adjust a value in the Installer menu tap the () or down () buttons.
To exit the installer menu tap the "Mode" button, the "Fan" button or wait 60 seconds.
Default Installer Values are shown in the examples below.
20 | P a g e
88:15"
(eight eight one five).
88:21"
– (eight eight two one) the factory default PIN (or your