Table of Contents
Advertisement
Cd = 01
Commissioning Mode. See page 38 for more information.
Cd = 0 ‐ Commissioning mode is OFF.
Cd = 1 ‐ All time delays are off or reduced to a very small value.
SS = 0
Start Stop Mode Override
SS = 0 ‐ User Start Stop program in use
SS = 1 ‐ Thermostat held in "Start" program typically via call from ModBus master.
SS = 2 ‐ Thermostat held in "Stop" program typically via call from ModBus master.
OF
Override Function
OF=0 – The SMT‐770 will control its own relays (Default)
OF=1 – The 5 SMT‐770 relays are being controlled via a ModBus master only.
No buttons will function and all programming and control information is
suppressed. The word "Override" will flash on the LCD during this mode.
The SMT‐770 will automatically exit this mode if no valid ModBus signals have
been received for 5 mins.
RS = 40
Thermostat sensor response time to room temperature changes.
Adjustable from RS=10 (very fast) to RS=90 (very slow) Default is RS=40
tS = 0
Factory test mode ‐ See page 40 for more information.
TS = 0 ‐ Factory test Mode OFF.
TS = 1 ‐ Display configuration code.*
TS = 2 ‐ Step cycle all relays in sequence, 1 2 3 4 5 etc.
TS = 3 ‐ Reset software to factory default. Press Fan button to initiate.
(* this table is available from the download section at www.thermostat.com.au)
(Typically used by ModBus Master)
(Typically used by ModBus Master)
31 | P a g e
Hide quick links:
Advertisement
Table of Contents
