Using Remote Temperature Sensors
Figure 15
Twin Averaging Sensors
Three Averaging Sensors
Single Sensor
Single or multiple room air temperature
sensors can be connected to the SMT‐770
"TT" terminals if temperature averaging
over a larger area is desired. 4 examples
of commonly used sensor configurations
are shown. Note ‐ Either TT=RS (remote
sensor) or TT=Av (Averaging sensors)
Four Averaging Sensors
value must be set in the advanced installer
menu for these sensors to be used.
Please note the configuration of RS‐01 & RS‐02 sensors in the examples provided
above. Other sensor configurations are also available.
37 | P a g e