Fo = 0/2 Fan Options ‐ Advanced Fan Functions
This function is only enabled when the selected fan mode is Fan On.
"FAN ON" will be displayed in the LCD to confirm this mode.
FO = 0 ‐ (Default Residential mode).The fan will run continuously ‐, 24 hours a day
7 days a week.
FO = 1 ‐ The fan will continue to run after the cooling stops to ensure the
maximum fresh air ventilation and to aid in cooling. The fan will stop after the
heating stops. (This is done to prevent cold drafts that may occur on cold days
when A/C system is heating).
FO = 2 ‐ (Default in Start Stop Mode).Available only if in Programmable Mode
(Sw6=on). The Fan will Run continuously from program # 1 (or Start) Program to
program #4 (or Stop) program and then run in AUTO mode overnight to maintain
the night time set points.
FO = 3 ‐ Available only if in Programmable Mode (Sw6=on). This mode is the
combination of option 1 and option 2 given above.
FP = 0
Fan Purge Time Period (Fan run on)
If fan mode is Auto Fan, the indoor fan will run for FP=XX minutes after heating or
cooling has stopped to extract any stored energy in the coils etc –
(Necessary for electric element heating).
Adjustable between off to 5 minutes in 1 minute intervals.
24 | P a g e