Remove and discard the plastic tab on the internally fitted backup battery so that the
battery is now in circuit and operating. Take care not to damage the battery holder
when doing this.
When attaching the thermostat to the base, avoid twisting the case as this may stress
the LCD and cause it to crack. Avoid running wiring near the internally fitted sensor.
Take care not to damage or crush the temperature sensor between the two half's of
the case when you close the Chameleon case. Check this sensor location.
Advanced Installer Settings
The SMT‐770 is fitted with many advanced functions that can be finetuned by the
installer to specifically match the needs of the project of the user.
Normally these functions will not need to be altered from the factory default position
however, there may be times when you wish to alter a setting or control capability so
that the SMT‐770 performance will perfectly match a particular application. On the next
few pages there is detailed explanation of these functions and their range of control.
While in the advanced installer menu, all SMT‐770 equipment control functions will be
suspended. Normal equipment operation will continue when you have exited this menu
(after any anti cycle delays or safety delays have terminated).
19 | P a g e