Yamaha XV19SW Service Manual page 225

Engine mounting nut (rear lower
side)
98 Nm (9.8 m·kg, 71 ft·lb)
Engine mounting nut (front lower
side)
105 Nm (10.5 m·kg, 75 ft·lb)
Engine bracket nut (rear upper
side)
53 Nm (5.3 m·kg, 38 ft·lb)
Engine mounting nut (rear upper
side)
98 Nm (9.8 m·kg, 71 ft·lb)
Engine mounting bolt (left upper
side)
66 Nm (6.6 m·kg, 48 ft·lb)
®
LOCTITE
Engine mounting bolt (right up-
per side)
59 Nm (5.9 m·kg, 43 ft·lb)
Engine bracket bolt (left upper
side)
53 Nm (5.3 m·kg, 38 ft·lb)
Engine bracket bolt (right upper
side)
53 Nm (5.3 m·kg, 38 ft·lb)
5. Install:
• Engine brackets (front upper side) "1"
• Engine bracket bolts (front upper side) "2"
• Engine bracket nuts (front upper side) "3"
• Engine cross-member bracket "4"
• Engine cross-member bracket bolts "5"
• Engine mounting bolt (front upper side) "6"
• Engine mounting nut (front upper side) "7"
NOTE:
Do not fully tighten the bolts and nuts.
6. Install:
• Lead holder bracket
• Lead
(removed during engine removal)
NOTE:
To install and route the leads, refer to "CABLE
ROUTING" on page 2-45.
Refer to "ENGINE REMOVAL" on page 5-1.
7. Install:
• Transfer gear case
• Drive pulley case
Refer to "TRANSFER GEAR CASE" on page
5-81.
8. Install:
• Drive pulley
• Transfer gear case bracket
Refer to "BELT DRIVE" on page 4-80.
ENGINE REMOVAL
9. Tighten:
• Engine bracket nut (front upper side) "3"
• Engine cross-member bracket bolts "5"
• Engine mounting nut (front upper side) "7"
Engine bracket nut (front upper
side)
53 Nm (5.3 m·kg, 38 ft·lb)
Engine cross-member bracket
bolt
30 Nm (3.0 m·kg, 22 ft·lb)
LOCTITE
Engine mounting nut (front upper
side)
98 Nm (9.8 m·kg, 71 ft·lb)
2
1
5
4
5
5-13
®
3
7
6
2
1