Yamaha XV19SW Service Manual page 147

2. Check:
• Front brake discs
Refer to "CHECKING THE FRONT BRAKE
DISCS" on page 4-36.
3. Lubricate:
• Oil seal lips
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Front wheel axle
NOTE:
Install the tire and wheel with the mark "1" point-
ing in the direction of wheel rotation.
5. Tighten:
• Front wheel axle
• Front wheel axle pinch bolt
Front wheel axle
72 Nm (7.2 m·kg, 52 ft·lb)
Front wheel axle pinch bolt
23 Nm (2.3 m·kg, 17 ft·lb)
EC1D71004
CAUTION:
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
6. Install:
• Front brake calipers
Front brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
EWA13500
WARNING
Make sure the brake hose is routed properly.
7. Install:
• Front fender
• Left front brake hose guide bracket
• Right front brake hose guide bracket
NOTE:
• Temporarily tighten the front fender bolts.
• Apply locking agent (LOCTITE
of the front fender bolts.
8. Install:
• Front fender stay rod "1"
• Left front fender stay "2"
• Right front fender stay "3"
NOTE:
• Insert the rod into the front wheel axle from the
right side of the vehicle.
• Tighten the left front fender stay bolt (front
side) "4" to specification while holding the rod
with a wrench "5", and then tighten the left front
fender stay bolt (rear side) and right front fend-
er stay bolts to specification.
1
9. Tighten:
• Front fender bolts
Front fender bolt
16 Nm (1.6 m·kg, 11 ft·lb)
LOCTITE
4-21
FRONT WHEEL
®
) to the threads
2
4
3
5
®