Yamaha XV19SW Service Manual page 122

b. Disconnect:
• Headlight coupler "1"
c. Detach:
• Headlight bulb holder "2"
1
d. Remove:
• Headlight bulb
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
e. Install:
• Headlight bulb New
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
f. Attach:
• Headlight bulb holder
g. Connect:
• Headlight coupler
h. Install:
• Headlight bulb cover
L LLL L LLL L L LLL L L LLL L
1
2
L LLL L L LLL L LLL
3-32
ELECTRICAL SYSTEM
7. Install:
• Headlight assembly
8. Connect:
• Air temperature sensor coupler
9. Install:
• Headlight cover
Headlight cover bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
10.Install:
• Windshield (For XV19CTS(C)/
XV19CT(C)/XV19CTM(C))
Refer to "GENERAL CHASSIS" on page 4-1.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
1. Adjust:
• Headlight beam (vertically)
M MMM M MMM M M MMM M M MMM M
a. Turn the adjusting bolt "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
a
b
1
L LLL L LLL L L LLL L L LLL L
2. Adjust:
• Headlight beam (horizontally)
M MMM M MMM M M MMM M M MMM M
a. Turn the adjusting bolt "1" in direction "a" or
"b".
Direction "a"
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
M MMM M M MMM M MMM
L LLL L L LLL L LLL
M MMM M M MMM M MMM