Installing The Front Wheel (Front Brake Discs) - Yamaha XV19SW Service Manual

c. Turn the front wheel 90
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
f. Repeat steps (d) through (f) several times un-
til all the marks come to rest at the same spot.
g. The spot where all the marks come to rest is
the front wheel's heavy spot "X".
L LLL L LLL L L LLL L L LLL L
3. Adjust:
• Front wheel static balance
M MMM M MMM M M MMM M M MMM M
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
NOTE:
Start with the lightest weight.
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
°
so that the "X " mark
1
" mark at
2
L LLL L L LLL L LLL
M MMM M M MMM M MMM
4-20
FRONT WHEEL
c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
L LLL L LLL L L LLL L L LLL L
4. Check:
• Front wheel static balance
M MMM M MMM M M MMM M M MMM M
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
L LLL L LLL L L LLL L L LLL L
EAS22000
INSTALLING THE FRONT WHEEL (FRONT
BRAKE DISCS)
The following procedure applies to both of the
front brake discs.
1. Install:
• Front brake disc
• Front brake disc cover
Front brake disc bolt
23 Nm (2.3 m·kg, 17 ft·lb)
®
LOCTITE
NOTE:
Tighten the front brake disc bolts in stages and
in a crisscross pattern.
L LLL L L LLL L LLL
M MMM M M MMM M MMM
L LLL L L LLL L LLL