Sharp MX-M550U Service Manual page 51

No. Name
63 Fusing roller (Heating)
64 Paper feed roller (DSPF)
65 Separation roller (DSPF)
66 Paper pickup roller (DSPF)
67 Transport roller 1 (Drive) (DSPF)
68 Transport roller 1 (Drive) (DSPF)
69 First resist roller (Drive) (DSPF)
70 First resist roller (Idle) (DSPF)
71 Transport roller 2 (Drive) (DSPF)
72 Transport roller 2 (Idle) (DSPF)
73 Second resist roller (Drive) (DSPF)
74 Second resist roller (Idle) (DSPF)
75 Paper exit roller (Drive) (DSPF)
76 Paper exit roller (Idle) (DSPF)
77 Transfer cleaning roller
78 Transfer tension roller
79 Transfer roller
80 Transfer roller 1A (Drive)
81 Transfer roller 1A (Idle)
82 Cleaning brush roller
83 Paper exit roller 3 (Drive)
84 Paper exit roller 3 (Idle)
85 Pressure connect roller
86 WEB roller
S. Filter
No. Name
1 Ozone filter
2 Toner filter
Heat and press toner onto paper to fuse images.
Feeds paper to the paper transport section.
Separates paper to prevent against double feed.
Sends paper to the paper transport section.
Transports paper (which is transported by the first resist roller) to the second resist roller.
Applies a pressure to paper and the transport roller to provide a transport power of the
transport roller to paper.
Controls the paper transport timing. / Adjusts paper to be horizontal.
Applies a pressure to paper and the resist roller to provide a transport power of the resist
roller to paper.
Transports paper transported from the paper exit roller 1 to the transport roller 3.
Applies a pressure to paper and the transport roller to provide a transport power of the
transport roller to paper.
Controls the paper transport timing. / Adjusts paper to be horizontal.
Applies a pressure to paper and the resist roller to provide a transport power of the resist
roller to paper.
Discharges paper.
Applies a pressure to paper and the paper exit roller to provide a transport power of the
paper exit roller to paper.
Cleans the transfer belt.
Applies a proper tension to the transfer belt.
Applies a proper voltage to the transfer belt.
Transports paper (which is fed from the manual paper feed tray) to the transport roller.
Applies a pressure to paper and the transport roller to provide a transport power of the
transport roller to paper.
Removes paper dust from the photoconductor drum.
Discharges paper to the paper exit tray. /Switches back paper.
Applies a pressure to paper and the transport roller to provide a transport power of the
transport roller to paper.
Applies a pressure to WEB paper to connect with the heat roller.
Clean the heat roller.
Absorbs ozone generated in the image process section.
Filters dispersed toner in the process section.
MX-M700N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 24
Function/Operation
Function/Operation
NOTE
1
2
NOTE