Sharp MX-M550U Service Manual page 377

3) Remove the stopper. Remove the E-ring to remove the bear-
ing.
4) Remove the supporting plate. Remove the connection plate,
and remove the gears.
5) Remove the E-ring to remove the gear.
6)
c. Fusing cooling fan motor 1
d. Fusing cooling fan motor 3
e. Fusing cooling fan motor 4
1)
2)
3)
MX-M700N PAPER EXIT SECTION O – 4
Remove the paper exit roller 1.
Remove the paper exit unit. (See "(1) Paper exit unit")
Remove the upper cover.
Remove the fusing cooling fan motor 1 (A), 3 (B), and 4 (C).
C
A
[Caution when attaching]
• When assembling, be careful of the direction of the fan.
(Fit the fan with the mark rotating direction)
B
REVERSE
Fan blowing direction