Sharp MX-M550U Service Manual page 162

66-24
Purpose Clear
Function (Purpose) Used to clear the FAST memory data.
Section FAX
Operation/Procedure
1) Select YES/NO of data clear.
1 YES FAST memory data is cleared
2 NO Not cleared.
2) Press [START] key.
SIMULATION 66-24
FAST MEMORY DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
66-25
Purpose Setting
Function (Purpose) Used to register the FAX number for
Modem dial-in. (Only when FAX is installed)
Not used in the market. (For development)
Section FAX
Operation/Procedure
1) Enter the Modem dial-in FAX number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
SIMULATION 66-25
M-D-IN FAX NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
66-26
Purpose Setting
Function (Purpose) Used to register external telephone num-
bers for Modem dial-in. (Only when FAX is
installed) Not used in the market. (For
development)
Section FAX
Operation/Procedure
1) Enter the Modem dial-in FAX number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
SIMULATION 66-26
M-D-IN EXTEL NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
66-27
Purpose
Function (Purpose) Used to register the transfer number for
Section
Operation/Procedure
1) Enter the voice warp transfer number (1 - 9, 0, *, #) with 10-
key.
2) Press [START] key.
SIMULATION 66-27
V-WP TRANSMIT NUMBER SETTING. 0-9:[0-9],*:[*],#:[#]
INPUT NUMBER AND PRESS START.
0123456789*#01234567
66-28
Purpose
Function (Purpose) Used to record voice messages. (Only
Section
Operation/Procedure
1) Enter the number corresponding to the registration number
with 10-key.
2) Use the handset to record a voice message. (Max. 6sec)
3) Onhook the handset. (End)
There are following five kinds of recording.
1 MESSAGE1
2 MESSAGE2
3 MESSAGE3
4 MESSAGE4
5 MESSAGE5
When [SYSTEM SETTING] key is pressed, recording is inter-
rupted.
SIMULATION 66-28
VOICE RECORD. SELECT 1-5, AND PRESS START.
1.MESSAGE1
4.MESSAGE4
66-29
Purpose
Function (Purpose) Used to clear data related to an address
Section
Operation/Procedure
1) Select YES/NO of data clear.
1 YES
2 NO
2) Press [START] key.
SIMULATION 66-29
ADDRESS DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
MX-M700N SIMULATION 7 – 68
Setting
voice warp. (Only when FAX is installed)
Not used in the market. (For development)
FAX
Setting
when FAX is installed.)
FAX
Recording No. 1
Recording No. 2
Recording No. 3
Recording No. 4
Recording No. 5
2.MESSAGE2 3.MESSAGE3
5.MESSAGE5
Clear
book (one-touch registration, program reg-
istration/expansion, relay memory box reg-
istration, each table content).
FAX, Network scanner
Address book data is cleared.
Not cleared.
1
1