3)
Remove the scanner motor unit.
4)
Remove the scanner motor.
p. Scanner FLASH PWB
q. Scanner control PWB
1)
Remove the rear cabinet. (See "o. Scanner motor")
2)
Release the lock, and remove the scanner FLASH PWB.
3)
Remove the clamp, and disconnect the connector.
* Do not disconnect the PCN harness connector.
4)
5)
r. DSPF open/close detector
1)
2)
s. Scanner home position sensor detector
1)
2)
MX-M700N SCANNER SECTION D – 9
Remove the scanner control PWB unit.
Remove the scanner control PWB.
Remove the rear cabinet. (See "o. Scanner motor")
Disconnect the connector, and remove the DSPF open/close
detector.
* When disconnecting the connector, hold the housing section
and slide straightly to remove.
Remove the rear cabinet. (See "o. Scanner motor")
Remove the DSPF harness holder B.