Sharp MX-M550U Service Manual page 138

SIMULATION 46-24
EXP.LEVEL SETUP SCANNER(SUPER FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0 50
3.3.0 50 4.4.0 50
6.AUTO(H) 50 7.1.0(H)
9.3.0(H) 50 10.4.0(H)
46-25
Purpose Adjustment
Function (Purpose) Used to adjust the scanner exposure level
in the ultra fine text mode.
Section —
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
* Normal mode (Image density adjustment level)
* Normal mode (Image density adjustment level) (Half-tone
mode)
* Auto mode
* Auto mode (Half-tone mode)
2) Press the [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1
(Half-tone)
8 2.0 (H) Exposure level 2
(Half-tone)
9 3.0 (H) Exposure level 3
(Half-tone)
10 4.0 (H) Exposure level 4
(Half-tone)
11 5.0 (H) Exposure level 5
(Half-tone)
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0 50
3.3.0 50 4.4.0 50
6.AUTO(H) 50 7.1.0(H)
9.3.0(H) 50 10.4.0(H)
2.2.0 50
5.5.0 50
50 8.2.0(H) 50
50 11.5.0(H) 50
Setting
range
0 - 99
2.2.0 50
5.5.0 50
50 8.2.0(H) 50
50 11.5.0(H) 50
MX-M700N SIMULATION 7 – 44
46-27
Purpose
Function (Purpose) Used to adjust the gamma (density gradi-
1
Section
Operation/Procedure
(Scanner mode selection)
1) Select the number corresponding to the scanner mode to be
adjusted with 10-key. (Select one of 1 - 9.)
2) Press the [START] key.
(Gamma adjustment)
After completion of the above procedures, perform the following
procedures.
1) Enter the gamma level with 10-key.
2) Press the [START] key.
The greater the adjustment value is, the greater the gamma value
is, resulting in a higher contrast.
1 OC_Fine.HT
2 OC_SFine.HT
3 OC_UFine.HT
4 SPF_Fine.HT
5 SPF_SFine.HT
Default
6 SPF_UFine.HT
50
7 CIS_Fine.HT
8 CIS_SFine.HT
9 CIS_UFine.HT
SIMULATION 46-27
GAMMA SETUP(SCNNER), SELECT 1-9, AND PRESS START.
1.OC_Fine.HT
4.SPF_Fine.HT
7.CIS_Fine.HT
46-31
Purpose
Function (Purpose) Used to adjust sharpness of the copy
Section
Operation/Procedure
(Copy mode selection)
1) Select the number corresponding to the copy mode to be
adjusted with 10-key. (Select one of 1 - 16.)
2) Press the [START] key.
(Sharpness adjustment)
After completion of the above procedures, perform the following
procedures.
1) Enter the sharpness level with 10-key.
2) Press the [START] key.
The greater the adjustment value is, the greater the sharpness is.
Adjustment
ent) of the network scanner mode.
—
Item
Fine text (Half-tone)
(OC)
Super fine (Half-tone)
(OC)
Ultra fine (Half-tone)
(OC)
Fine text (Half-tone)
(SPF)
Super fine (Half-tone)
(SPF)
Ultra fine (Half-tone)
(SPF)
Fine text (Half-tone)
(CIS)
Super fine (Half-tone)
(CIS)
Ultra fine (Half-tone)
(CIS)
64 2.OC_SFine.HT 64 3.OC_UFine.HT
64 5.SPF_SFine.HT 64 6.SPF_UFine.HT
64 8.CIS_SFine.HT 64 9.CIS_UFine.HT
Adjustment
mode.
—
Setting
Default
range
0 - 127 64
64
64
64