Sharp MX-M550U Service Manual page 407

MX-M700N
[S] SENSOR, SWITCH SECTION
1. Disassembly and assembly
A. Sensors and switches
No.
(1) Power switch
(2) Main power switch
(3) Front door open/close detector
(4) Left door open/close detector
(5) Dry heater switch
(6) Machine temperature sensor
(2)
(3)
(4)
(1) Power switch
(2) Main power switch
(3) Front door open/close detector
1) Remove the front cabinet band, and remove the front cabinet.
2) Remove the toner bottle. (See "(1) Toner bottle unit" in "[Toner
hopper and toner bottle section]")
3) Remove the toner hopper unit. (See "(2) Toner hopper unit" in
"[Toner hopper and toner bottle section]
4) Remove the developing unit. (See "(1) Developing unit" in the
"[Developer tank section]")
5) Remove the process unit. (See "A-(1) Process unit" in the
"[OPC drum section]")
6) Raise the process DV cover diagonally, and remove the front
right cover.
Parts
(6)
(1)
(5)
MX-M700N SENSOR, SWITCH SECTION S – 1
7) Disconnect the connector, and remove the power switch.
* When installing, be careful of the connector connecting posi-
tion and the installing direction. Also be careful not to break
the SW pawl.
4
1 6
5
2 7
3 8
Power switch
(Connector surface)
8) Disconnect the connector, and remove the main power switch
unit.
* When installing, be careful of the connector connecting posi-
tion and the installing direction. Also be careful not to break
the SW pawl.
1 3
2 4
Main power switch
(Connector surface)
[Connector connecting position]
Connector color Line color
1 Yellow Black
2 White Black
3 Blue Black
4 White Red
5 White Brown
6 Yellow White
7 White White
8 Blue White
[Connector connecting position]
Connector color Line color
1 White Black
2 Black Black
3 White White
4 Black White