Sharp MX-M550U Service Manual page 113

Code
M2PFD_S M2PFD remaining jam
MPRD2_N2 MPRD2 not-reached jam (Tray 2 feed paper)
MPRD2_NM MPRD2 not reached jam
(Manual paper feed tray feed paper)
MPRD2_NL MPRD2 not-reached jam
(LCC paper feed paper)
MPRD2_S2 MPRD2 remaining jam (Tray 2 feed paper)
MPRD2_SM MPRD2 remaining jam
(Manual paper feed tray feed paper)
MPRD2_SL MPRD2 remaining jam (LCC paper feed paper)
TRAY2 Tray 2 paper feed jam (MPRD1 not-reached)
MPRD1_NM MPRD1 not-reached jam
(Manual paper feed tray feed paper)
MPRD1_NL MPRD1 not-reached jam
(LCC paper feed paper)
MPRD1_S2 MPRD1 remaining jam (Tray 2 feed paper)
MPRD1_SM MPRD1 remaining jam
(Manual paper feed tray feed paper)
MPRD1_SL MPRD1 remaining jam (LCC paper feed paper)
MPFD2_NM MPFD2 not-reached jam
(Manual paper feed tray feed paper)
MPFD2_NL MPFD2 not-reached jam
(LCC paper feed paper)
MPFD2_SM MPFD2 remaining jam
(Manual paper feed tray feed paper)
MPFD2_SL MPFD2 remaining jam
(LCC paper feed paper)
BPT MPFD2 remaining jam
(Manual paper feed tray feed paper)
MPFD1_S MPFD1 remaining jam
LPPD_N LPPD not-reached jam
LPPD_S LPPD remaining jam
LPPD_LCC LPPD jam (No reply in a certain time after
preliminary paper feed from LCC and issuing the
paper feed command.)
LCC LCC paper feed jam (LTD not-reached jam )
LTD_S LTD remaining jam
FES_N FINISHER entry port sensor not-reached jam
FES_S FINISHER entry port sensor remaining jam
FFPS_N FINISHER Saddle not-reached jam
FFPS_S FINISHER Saddle remaining jam
FEXIT_S FINISHER bundle exit remaining jam
FSTPL FINISHER Staple jam
FPNCH FINISHER punch JAM
FDOP FINISHER door open JAM
FIN_TIME FINISHER Abnormal paper interval jam
REG_SEN_N INSERTER Resist sensor not-reached jam
(When inserter paper feed)
REG_SEN_S INSERTER Resist sensor remaining jam
(When inserter paper feed)
TIM_SEN_N INSERTER Timing sensor not-reached jam
(When inserter paper feed)
TIM_SEN_S INSERTER Timing sensor remaining jam
(When inserter paper feed)
HI_SEN_NI INSERTER Paper exit sensor not-reached jam
(When inserter paper feed)
HI_SEN_NP INSERTER Paper exit sensor not-reached jam
(Main unit paper feed)
HI_SEN_S INSERTER Paper exit sensor remaining jam
H_SEN_NF INSERTER Reverse sensor not-reached jam
(When entering into the reverse path.)
H_SEN_NB INSERTER Reverse sensor not-reached jam
(When discharging to the reverse path.)
H_SEN_SF INSERTER Reverse sensor remaining jam
(When entering into the reverse path.)
H_SEN_SB INSERTER Reverse sensor remaining jam
(When discharging to the reverse path.)
Description
MX-M700N SIMULATION 7 – 19
SIMULATION 22-3
PAPER JAM HISTORY.
** ** * ** ,* ** ** ** ,* ** ** ** , ** ** ** *, ** ** ** *, ** ** * ** ,* ** ** ** ,* ** ** ** ,* * ** ** *,*******
** ** * ** ,* ** ** ** ,* ** ** ** , ** ** ** *, ** ** ** *, ** ** * ** ,* ** ** ** ,* ** ** ** ,* * ** ** *,*******
** ** * ** ,* ** ** ** ,* ** ** ** , ** ** ** *, ** ** ** *, ** ** * ** ,* ** ** ** ,* ** ** ** ,* * ** ** *,*******
** ** * ** ,* ** ** ** ,* ** ** ** , ** ** ** *, ** ** ** *, ** ** * ** ,* ** ** ** ,* ** ** ** ,* * ** ** *,*******
** ** * ** ,* ** ** ** ,* ** ** ** , ** ** ** *, ** ** ** *, ** ** * ** ,* ** ** ** ,* ** ** ** ,* * ** ** *,*******
·· ·· · ·· ·· ·· ·· ··
(10 lines, 80 digits = 800 characters)
22-4
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to check the trouble (self diag) his-
tory.
Section —
Operation/Procedure
The trouble history is displayed.
The trouble history is displayed sequentially from the latest one.
The max. 100 items can be stored. (The oldest one is deleted
sequentially.) The trouble position can be identified by the data.
SIMULATION 22-4
TROUBLE HISTORY.
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
···············
(10 lines, 80 digits = 800 characters)
22-5
Purpose Others
Function (Purpose) Used to check the ROM version of each
unit (section).
Section —
Operation/Procedure
The ROM version of each section can be checked. When there is
any problem in the software, use this simulation to check the ROM
version of each section and revise the version if necessary.
S/N Engine section serial number
MFP MFP controller
(LANGUAGE) (Language version)
BOOT MFP controller BOOT ROM
FAX FAX controller
PCU PCU controller
SCANNER Scanner controller
FINISHER Finisher controller
SADDLE UNIT Saddle unit
LCC Side LCC
INSERTER Inserter
SIMULATION 22-5
ROM VERSION DATA DISPLAY.
S/N: 0000000000
MFP: 1.00
PCU: 1.00
SCANNER: 1.00
FINISHER: 1.00
SADDLE UNIT: 1.00
INSERTER: 1.00
(LANGUAGE: 1.00)
BOOT: 1.00
FAX: 1.00
LCC: 1.00