Sharp MX-3500N Service Manual page 404

e. Primary transfer roller
f. Primary transfer conduction collar
g. Primary transfer roller bearing
h. Y auxiliary roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the primary transfer belt.
4) Disengage the engagement on the front side, and remove the
primary transfer roller bearing (A) and the primary transfer
roller (B) and the primary transfer conduction collar (C).
Remove the Y auxiliary roller (D).
A
A
A
1
A
B
B
3
D
D
i. Belt drive gear
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the screws, and remove the belt drive gear.
j. Transfer drive roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the primary transfer belt.
4) Clean the transfer drive roller.
B
B
B
2
C
C
C
C
MX3500N TRANSFER SECTION L – 6
k. Transfer follower roller
l. Tension roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the primary transfer belt.
4) Clean the trasnfer follower roller (A) and the tension roller (B).
A
m. Roller cleaning brush
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the primary transfer belt.
4) Check the roller CL brush.
n. Registration backup roller
1) Remove the primary trasnfer unit.
2) Remove the cleaner unit.
3) Remove the primary transfer belt.
4) Check the registration backup roller.
1
A
A
3
C
B
A
A
2
B
B
B
B