Sharp MX-3500N Service Manual page 157

* When [↑], [↓], [COLOR], or [BLACK] key is pressed, the current
set value is saved to EEPROM and RAM.
<Fusing temperature setting range and default values>
Item Display
A HL_UM PLAIN BW plain paper duplex
PAPER BW DUP TH_UM set value
B HL_LM PLAIN BW plain paper duplex
PAPER BW DUP TH_LM set value
C HL_E PLAIN BW plain paper duplex
PAPER BW DUP TH_E set value
D PLAIN PAPER BW BW plain paper duplex
DUP APP CNT applicable number of
sheets
E HL_UM PLAIN COLOR plain paper
PAPER CL DUP duplex TH_UM set value
F HL_LM PLAIN COLOR plain paper
PAPER CL DUP duplex TH_LM set value
G HL_E PLAIN COLOR plain paper
PAPER CL DUP duplex TH_E set value
H PLAIN PAPER CL COLOR plain paper
DUP APP CNT duplex applicable number
of sheets
I HL_UM HEAVY BW heavy paper duplex
PAPER BW DUP TH_UM set value
J HL_LM HEAVY BW heavy paper duplex
PAPER BW DUP TH_LM set value
K HL_E HEAVY BW heavy paper duplex
PAPER BW DUP TH_E set value
L HEAVY PAPER BW heavy paper duplex
BW DUP APP CNT applicable number of
sheets
M HL_UM HEAVY COLOR heavy paper
PAPER CL DUP duplex TH_UM set value
N HL_LM HEAVY COLOR heavy paper
PAPER CL DUP duplex TH_LM set value
O HL_E HEAVY COLOR heavy paper
PAPER CL DUP duplex TH_E set value
P HEAVY PAPER CL COLOR heavy paper
DUP APP CNT duplex applicable number
of sheets
*1 : Japan, China, AB_B
*2
: U.S.A., Canada, Europe, U.K., Australia, Inch, AB-A
TH_UM Fusing upper thermister main
TH_LM Fusing lower thermister main
TH_E Fusing upper thermister external
HL_UM Heater lamp upper main
HL_LM Heater lamp lower main
HL_E Heater lamp upper external
SIMULATION NO.43 04
TEST
FUSER TEMP SETUP2 FOR PAPER
A 175
A: 175
B 100
C 160
70 230
D 0
Set
Content range
70 to 230
30 to 200
70 to 230
0 to 60
70 to 230
30 to 200
70 to 230
0 to 60
70 to 230
30 to 200
70 to 230
0 to 60
70 to 230
30 to 200
70 to 230
0 to 60
CLOSE
HL_UM PLAIN PAPER BW DUP
HL_LM PLAIN PAPER BW DUP
HL_E PLAIN PAPER BW DUP
PLAIN PAPER BW DUP APP CNT
OK
MX3500N SIMULATION 7 – 49
Switch A
Thin plain paper
MX-3500N/ MX-4500N/
MX-3501N MX-4501N
Gr. 1 Gr. 2 Gr. 1 Gr. 2 Gr. 1
*1 *2 *1 *2
165 165 165 175
100 100 100 100
160 160 160 160
0 0 0 0
165 165 165 165
100 100 100 100
160 160 160 160
0 0 0 0
170 175 170 175
100 100 100 100
160 160 160 160
1 1 1 1
170 175 170 175
100 100 100 100
160 160 160 160
1 1 1 1
43-20
Purpose
Function (Purpose) Used to correct the environments of low
Section
Item
Operation/Procedure
0
1) When the machine enters Simulation 43-20, the screen on the
right is displayed. (The current set value is displayed.)
2) Select the set item with [↑] and [↓] buttons.
The highlighted section of the set value is switched and dis-
played on the set setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
If there is any item under [↓], an active display is made and
item is shifted.
Default value
Switch B Switch C (Cool-down
control YES, default =
Thick plain paper General plain paper
(Cool-down control YES)
MX-3500N/ MX-4500N/ MX-3500N/
MX-3501N MX-4501N MX-3501N
Gr. 2 Gr. 1 Gr. 2 Gr. 1
*1 *2 *1 *2 *1
170 175 175 180 165
100 100 100 100 100
160 160 160 160 160
1 1 1 1 0
170 175 170 175 165
100 100 100 100 100
160 160 160 160 160
1 1 1 1 0
170 175 170 175 170
100 100 100 100 100
160 160 160 160 160
1 1 1 1 1
170 175 170 175 170
100 100 100 100 100
160 160 160 160 160
1 1 1 1 1
Setting
temperature and low humidity (L/L) for the
fusing temperature setting 1 for each paper
(SIM 43-01).
Fusing
Operation
OFF)
MX-4500N/
MX-4501N
Gr. 2 Gr. 1 Gr. 2
*2 *1 *2
165 170 175
100 100 100
160 160 160
0 0 0
165 165 165
100 100 100
160 160 160
0 0 0
175 170 175
100 100 100
160 160 160
1 1 1
175 170 175
100 100 100
160 160 160
1 1 1