Sharp MX-3500N Service Manual page 261

CE-05 FTP server directory input error
Trouble content The entered FTP server directory is invalid.
The entered SMB server folder is invalid.
Section MFP
Case 1 Cause Network cable connection trouble
Check and Check to insure that the network cable is securely
remedy connected.
Case 2 Cause The FTP server account name registered as the
destination or the password for the account is
incorrect.
Check and Check to insure that there exits the FTP server
remedy directory registered as the destination.
Case 3 Cause The SMB server account name registered as the
destination or the password for it is incorrect.
Check and Check to insure that there exists the SMB server
remedy folder registered as the destination.
CE-06 POP3 server access error
Trouble content The specified mail server (POP3) is not found.
(POP3 server access error)
Section MFP
Case 1 Cause Network cable connection trouble
Check and Check to insure that the network cable is securely
remedy connected.
Case 2 Cause Network setup error
Check and 1) Check that the connected network supports
remedy TCP/IP protocol.
2) Check the Web page to insure that the POP3
server address is correctly set.
3) If the above address is described in
Hostname, check to insure that the DNS
server is correctly set.
Case 3 Cause PO3 server trouble
Check and Check the POP3 server for any trouble.
remedy
CE-07 POP3 server authentication check
error
Trouble content The entered POP3 server account name or the
authentication password is invalid. (POP3 server
authentication check error)
Section MFP
Case 1 Cause Network cable connection trouble
Check and Check to insure that the network cable is securely
remedy connected.
Case 2 Cause The POP3 server account name or the password
registered for the account is incorrect.
Check and Check to insure that the POP3 server account
remedy name or the password for the account is correct.
CE-08 POP3 server timeout error
Trouble content The specified mail server (POP3) does not
respond. (POP3 server timeout error)
Section MFP
Case 1 Cause Network cable connection trouble
Check and Check to insure that the network cable is securely
remedy connected.
Case 2 Cause POP3 server trouble
Check and Check the POP3 server for any trouble.
remedy
MX3500N SELF DIAG AND TROUBLE CODE 8 – 9
E6-10 Back-face shading trouble black
correction (DSPF)
Trouble content CCD black scan level abnormality when the copy
lamp is turned off. (MX-3501N/4501N)
Section Scanner
Case 1 Cause Installation error of the CCD unit flat cable
Check and Check the installing state of the flat cable to the
remedy CCD unit.
Case 2 Cause CCD unit abnormality
Check and Check the CCD unit.
remedy
Case 3 Cause SCU PWB abnormality
Check and Check the SCU PWB.
remedy
E6-11 Shading trouble white correction
(DSPF)
Trouble content CCD white scan level abnormality when the copy
lamp is on. (MX-3501N/4501N)
Section Scanner
Case 1 Cause Installation error of the CCD unit flat cable
Check and Check the installing state of the flat cable to the
remedy CCD unit.
Case 2 Cause Dirt on the mirror, the lens, or the reference white
plate.
Check and Clean the mirror, the lens, or the reference white
remedy plate.
Case 3 Cause Copy lamp lighting trouble
Check and Check the installing state of the flat cable to the
remedy copy lamp unit.
Case 4 Cause CCD unit abnormality
Check and Check the CCD unit.
remedy
Case 5 Cause SCU PWB abnormality
Check and Check the SCU PWB.
remedy
E6-14 Back-face SCAN-ASIC trouble
Trouble content Written register value cannot be read correctly
Section Scanner
Case 1 Cause SCU PWB abnormality
Check and Check the SCU PWB.
remedy