Sharp MX-3500N Service Manual page 204

* If there is a page over [↑], an active display is shown and the
page moves up. If there is no page upward, the display
grays out and the operation is invalid.
When there is a page under [↓], the display becomes active
and the page is shifted down.When there is no page under
[↓], the display grays out and the operation is invalid.
5) Press [EXECUTE] button.
[EXECUTE] button is highlighted, and [YES] and [NO] buttons
are changed from gray-out display to active display.
* If no firmware button is selected, [EXECUTE] button is dis-
abled.
6) Press [YES] button.
[YES] button is highlighted, and update of the selected firm-
ware is executed.
* When [NO] and [EXECUTE] button are pressed, the display
returns to the firmware select screen. At that time, the
selected firmware remains highlighted, and [EXECUTE] but-
ton returns to the normal display.
7) After completion of update, the result is displayed.
When the operation is completed normally, "COMPLET" is dis-
played. In case of an error, "ERROR" and the firmware where
the error occurred are displayed.
* The operation cannot be interrupted midway.
* When [OK] button is pressed, the machine is rebooted.
* When [CA] key is pressed on the folder or file selection screen or
the file selection screen, the simulation is terminated.
* When [SYSTEM SETTINGS] key is pressed on the folder or file
selection screen or the file selection screen, the display returns
to the sub code entry screen.
* When [CA] key or [SYSTEM SETTINGS] key is pressed to exit
the simulation on the file version display screen and the following
screens before execution, the machine is rebooted.
<Update target data firmware>
Display item Item description
CONFIG Configuration data
ICU (MAIN) ICU main section former half
ICU (BOOTM) ICU boot section main
ICU (BOOTS) ICU boot section sub
LANGUAGE Language support data program
(Generic name)
GRAPHIC Graphic data for L-LCD
SLIST SLIST data for L-LCD
PCU (BOOT) PCU boot section
PCU (MAIN) PCU main section
DESK (BOOT) Desk unit boot section
DESK (MAIN) Desk unit main section
A4LCC (BOOT) Side LCC (A4) boot section
A4LCC (MAIN) Side LCC (A4) main section
FIN (BOOT) Inner finisher boot section
FIN (MAIN) Inner finisher main section
INSERTER (BOOT) Inserter boot section
INSERTER (MAIN) Inserter main section
1KFIN (BOOT) 1K Finisher boot section
1KFIN (MAIN) 1K Finisher main section
4KFIN (BOOT) 4K Finisher boot section
4KFIN (MAIN) 4K Finisher main section
A3LCC (BOOT) Side LCC (A3) boot section
A3LCC (MAIN) Side LCC (A3) main section
SCU (BOOT) SCU boot section
SCU (MAIN) SCU main section
DSPF (BOOT) DSPF boot section
DSPF (MAIN) DSPF main section
FAX (BOOT) FAX1 Boot section
FAX (MAIN) FAX1 Main section
FAX OPTION (BOOT) FAX2 Boot section
FAX OPTION (MAIN) FAX2 Main section
ESCP_FONT ESC/P fonts
PDL_FONT PDL fonts
Display item
ANIMATION
IMAGE_DATA
COLOR PROFILE
<List of error display in case of error end>
Display item
CONF
ICUM
ICUBM
ICUBS
LANG
GRAPH
SLIST
PCUB
PCUM
DESKB
DESKM
LCC4B
LCC4M
FINB
FINM
FIN1B
FIN1M
INSB
INSM
FIN4B
FIN4M
LCC3B
LCC3M
SCUB
SCUM
DSPFB
DSPFM
FAXB
FAXM
Number of
FAXOPB
digits
FAXOPM
8 digits
ESCP
8 digits
PDL
8 digits
ANIME
8 digits
IMGDT
8 digits
8 digits
TEST
8 digits
FIRMWARE UPDATE/usbbd00
8 digits
8 digits
<DIR> FOLDER1
8 digits
8 digits
8 digits
8 digits
..
8 digits
8 digits
8 digits
49-3
8 digits
Purpose
8 digits
8 digits
Function (Purpose) The Operation Manual saved in the hard
8 digits
8 digits
Section
8 digits
Item
8 digits
Operation/Procedure
8 digits
8 digits 1) Insert the USB memory into the machine.
8 digits
* When USB is not connected, "INSERT A STORAGE E-
8 digits
MANUAL STORED ON" is displayed. When [OK] button is
8 digits
pressed, the display is shifted to the folder selection screen
8 digits
1.
8 digits
2) When a operation manual update folder button is pressed, the
8 digits
display is shifted to the operation manual update screen.
8 digits
* A folder name is displayed on the button.
8 digits
MX3500N SIMULATION 7 – 96
Item description
Animation data
Image ASIC data
Color profile
Item description
Configuration data
ICU main section former half
ICU boot section main
ICU boot section sub
Language support data program (Generic name)
Graphic data for L-LCD
SLIST data for L-LCD
PCU boot section
PCU main section
Desk unit boot section
Desk unit main section
Side LCC (A4) boot section
Side LCC (A4) main section
Inner finisher boot section
Inner Finisher main section
1K Finisher boot section
1K Finisher main section
Inserter boot section
Inserter main section
4K Finisher boot section
4K Finisher main section
Side LCC (A3) Boot section
Side LCC (A3) main section
SCU boot section
SCU main section
DSPF boot section
DSPF main section
FAX1 Boot section
FAX1 main section
FAX2 Boot section
FAX2 main section
ESC/P fonts
PDL fonts
Animation data
Image ASIC data
SIMULATION NO.49-01
FILE1
FILE2 <DIR> FOLDER2
Version-up
disk is updated.
—
Adjustment
Number of
digits
8 digits
8 digits
8 digits
0
CLOSE
1/1