Web Server Type - Yealink SIP-T4X Administrator's Manual

Administrator's Guide for SIP-T4X IP Phones
Procedure
Web server type can be configured using the configuration files or locally.
Configuration File
Local
To configure the web server type via web user interface:
1. Click on Network->Advanced.
2. In the Web Server block, select the desired value from the pull-down list of HTTP.
3. Enter the HTTP port in the HTTP Port (1~65535) field.
The default HTTP port is 80.
4. Select the desired value from the pull-down list of HTTPS.
5. Enter the HTTPS port in the HTTPS Port (1~65535) field.
The default HTTPS port is 443.
116
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Specify the web access type,
HTTP port and HTTPS port.
For more information, refer to

Web Server Type

on page 316.
Specify the web access type,
HTTP port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Specify the web access type.