Yealink SIP-T4X Administrator's Manual page 72

Administrator's Guide for SIP-T4X IP Phones
Local
To configure a custom logo via web user interface:
1. Click on Features->General Information.
2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to select the logo file from your local system.
4. Click Upload to upload the file.
5. Click Confirm to accept the change.
The custom logo screen and the idle screen are displayed alternately.
Softkey layout is used to customize the soft keys at the bottom of the LCD screen to best
meet users' requirements. It can be configured based on call states. In addition to
specifying which soft keys to display, you can determine their display order. You can
create a template about the softkey layout for the different call states. For more
information on the softkey layout template, refer to
227.
56
Web User Interface
Logo Customization on page 279.
Configure the logo shown on the
idle screen.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Softkey Layout Template on page