Yealink SIP-T4X Administrator's Manual page 333

Example
Parameter-
wui.https_enable
Description
Format
Default Value
Range
Example
Parameter-
network.port.https
Description
Format
Default Value
Range
Example
Parameter-
account.X.cid_source
Description
network.port.http = 80
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to access its
web user interface using HTTPS protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
wui.https_enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the HTTPS port used to access the
web user interface of the IP phone.
The default HTTPS port is 443.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
443
1 to 65535
network.port.https = 443
Configuration File
<MAC>.cfg
Configures the presentation of the caller
identity for account X.
Appendix
317