Yealink SIP-T4X Administrator's Manual page 189

TLV Type
Media Capabilities
Network Policy
Extended
Power-via-MDI
Inventory –
Hardware Revision
TIA
Organizationally
Inventory –
Specific TLVs
Firmware Revision
Inventory –
Software Revision
Inventory – Serial
Number
Inventory –
Manufacturer Name
Inventory – Model
Name
Asset ID
TLV Name
The advertised capabilities of PMD.
Auto-Negotiation is:
100BASE-TX (full duplex mode)
100BASE-TX (half duplex mode)
10BASE-T (full duplex mode)
10BASE-T (half duplex mode)
The MED device type of the IP phone and
the supported LLDP-MED TLV type can be
encapsulated in LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Port VLAN ID, application type, L2 priority
and DSCP value.
Power type, source, priority and value.
Hardware revision of phone.
Firmware revision of phone.
Software revision of phone.
Serial number of phone.
Manufacturer name of phone.
The default value is ―yealink‖.
Model name of phone.
Assertion identifier of phone.
The default value is ―asset‖.
Configuring Advanced Features
Description
173