Connected Line Identification Presentation - Yealink SIP-T4X Administrator's Manual
Ultra-elegant ip phone
Hide thumbs
Also See for SIP-T4X:
- Administrator's manual (587 pages) ,
- Administration manual (466 pages) ,
- Provisioning manual (148 pages)
Table of Contents
Advertisement
Administrator's Guide for SIP-T4X IP Phones
To configure the presentation of the caller identity via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
4.
Select the desired value from the pull-down list of the Caller ID Source.
5.
Click Confirm to accept the change.
Connected line identification presentation (COLP) allows IP phones to display the
identity of the callee specified for outgoing calls. The IP phone can display the Dialed
Digits, or the identity in a SIP header (Remote-Party-ID or P-Asserted-Identity) received,
or the identity in the From header carried in the UPDATE message sent by the callee as
described in RFC 4916.
If the callee has existed in the directory, the local name assigned to the callee should be
preferentially displayed.
Procedure
COLP can be configured only using the configuration files.
Configuration File
118
<MAC>.cfg
Configure the presentation of
the callee identity.
For more information, refer to
Connected Line Identification
Presentation
on page 318.
Advertisement
Table of Contents
