Yealink SIP-T4X Administrator's Manual page 190

Administrator's Guide for SIP-T4X IP Phones
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
Local
To configure LLDP via web user interface:
1. Click on Network->Advanced.
2. In the LLDP block, select the desired value from the pull-down list of Active.
3. Enter the desired time interval in the Packet Interval (1~3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
5. Click OK to reboot the IP phone.
VLAN (Virtual Local Area Network) is used to logically divide a physical network into
several broadcast domains. VLAN membership can be configured through software
instead of physically relocating devices or connections. Grouping devices with a
174
<y0000000000xx>.cfg
Web User Interface
Configure LLDP feature.
For more information, refer to
LLDP on page 350.
Configure LLDP feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load