Yealink SIP-T4X Administrator's Manual page 78

Administrator's Guide for SIP-T4X IP Phones
4. Click Confirm to accept the change.
To configure a send key via phone user interface:
1. Press Menu->Call Features->Others->General.
2. Press
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change.
Note
Send tone works only if key tone is enabled.
Key tone is enabled by default.
A hotline is a point-to-point communication link in which a call is automatically directed
to the preset hotline number. The IP phone automatically dials out the hotline number
using the first available line after a time interval when off-hook. IP phones only support
one hotline number.
Procedure
Hotline can be configured using the configuration files or locally.
Configuration File
Local
To configure hotline via web user interface:
1. Click on Features->General Information.
62
or , or the Switch soft key to select # or * from the Key as Send field,
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
For more information, refer to
Hotline on page 282.
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.