Yealink SIP-T4X Administrator's Manual page 245

Directory provides easy access to frequently used lists. Users can access lists by
pressing the Directory soft key when the IP phone is idle. The lists may contain Local
Directory, History, Remote Phone Book and LDAP . You can add the desired list(s) to
Directory using the supplied directory template (favorite_setting.xml). After setup, place
the directory template to the provisioning server and specify the access URL in the
configuration files.
When editing a directory template, learn the following:
Do not rename the directory template.

<root_favorite_set> indicates the start of a template and </root_favorite_set>

indicates the end of a template.
The default display names of directory lists are Local Directory, History, Remote

Phone Book and LDAP .
When specifying the display priority of the directory list, the valid values are 1, 2, 3

and 4. 1 is the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list for Directory, the valid values

are 0 and 1. 0 stands for Disabled, 1 stands for Enabled.
Procedure
Use the following procedures to customize a directory template.
Customizing a directory template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, you want to configure the local directory list, edit the
following strings:
<item id_name="localdirectory" display_name="Local Directory" priority="1"
enable="1" />
Where:
id_name="" specifies the existing directory list (―localdirectory‖ for the local
directory list). Do not edit this field.
display_name="" specifies the display name of the directory list. We recommend
you do not edit this field.
priority="" specifies the display priority of the directory list.
enable="" enables or disables the directory list for Directory.
3. Edit the values within double quotes.
4. Place this file to the provisioning server.
Resource Files
229