Yealink SIP-T4X Administrator's Manual page 280

Administrator's Guide for SIP-T4X IP Phones
Example
Parameter-
dialplan.block_out.line_id.X
Description
Format
Default Value
Range
Example
Parameter-
phone_setting.common_power
_led_enable
Description
Format
Default Value
Range
Example
Parameter-
phone_setting.ring_power_led_
flash_enable
Description
264
dialplan.block_out.number.1 = 1000
Configuration File
<y0000000000xx>.cfg
Configures the desired line to apply this block
out rule.
X ranges from 1 to 10.
Note: Multiple line IDs are separated by
commas.
Integer
Blank (for all lines)
Valid values are:
0 to 6 (for SIP-T48G/T46G)
0 to 3 (for SIP-T42G/T41P)
dialplan.block_out.line_id.1 = 1,2,3
Configuration File
<y0000000000xx>.cfg
Enables or disables the power indicator LED to
be turned on.
Boolean
0
Valid values are:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
phone_setting.common_power_led_enable =
0
Configuration File
<y0000000000xx>.cfg
Enables or disables the power indicator LED to
flash when the phone receives an incoming