Yealink SIP-T4X Administrator's Manual page 274

Administrator's Guide for SIP-T4X IP Phones
Parameter-
network.internet_port.type
Description
Format
Default Value
Range
Example
Parameter-
network.pppoe.user
Description
Format
Default Value
Range
Example
Parameter-
network.pppoe.password
Description
258
Configuration File
<MAC>.cfg
Configures the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
0
Valid values are:
0-DHCP
1-PPPoE (not applicable to SIP-T42G/T41P)
2-Static IP Address
network.internet_port.type= 1
Configuration File
<y0000000000xx>.cfg
Configures the PPPoE user name when the
Internet port type is configured as PPPoE.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to SIP-T48G/T46G IP
phones.
String
Blank
String within 32 characters
network.pppoe.user = xmyealink
Configuration File
<y0000000000xx>.cfg
Configures the PPPoE password when the
Internet port type is configured as PPPoE.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to SIP-T48G/T46G IP