Yealink SIP-T4X Administrator's Manual page 94

Administrator's Guide for SIP-T4X IP Phones
Procedure
Call completion can be configured using the configuration files or locally.
Configuration File
Local
To configure call completion via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Call Completion.
3. Click Confirm to accept the change.
To configure call completion via phone user interface:
1. Press Menu->Call Features->Others->Call Completion.
2. Press
Completion field.
3. Press the Save soft key to accept the change.
78
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
or , or the Switch soft key to select the desired value from the Call
Configure call completion.
For more information, refer to
Completion on page 288.
Configure call completion.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure call completion.
Call