Table of Contents
Advertisement
HDD SET UP
You can change the temporary memory time length for Live Memory (see page 21).
LIVE MEMORY
Setting options
OFF, 30 MIN, 1 HR, and 3 HR
When this function is set to "NICAM," the NICAM audio programmes will be received (or
recorded). (See page 22.)
AUDIO REC
When this function is set to "MONO," the standard (monaural) audio programmes will be
Setting options
received (or recorded). If you receive a NICAM bilingual programme with this function set to
• NICAM
"MONO," the sound will be muted.
• MONO
This function works only for NICAM bilingual programme.
You can locate a scene ahead or behind of the current one by jumping a selected time interval
JUMP TIME
during playback (or Live Memory: Playback) or recording (or Live Memory: Recording).
Setting options
• 15 MIN
• 30 MIN
• 1 HR
FUNCTION SET UP
With this function set to "ON," various operational indicators (for HDD and TV tuner
O.S.D.
operations) appear on the TV for a while when you operate the HDD deck.
Setting options
• ON
• When you use this unit as the playback component for editing (dubbing to a VCR, etc.), be sure to set
• OFF
When this function is set to "ON," you can easily start recording the programme that you are
watching on the TV (received by the TV itself, not through the TV tuner built in this unit) by
pressing ¶ (record) on the unit (or by pressing 3 (SELECT) while holding REC ¶ on the
remote control).
DIRECT REC
• This function is possible only when a TV offering T-V Link, etc. is connected with a fully-wired 21-pin
Setting options
• ON
• If "DIRECT REC" is set to "OFF," follow the procedure described in "Basic Recording" (see page 23).
• OFF
• During Direct Recording, "– –" appears in the display window.
• If a programme is recorded with Direct Recording, the station name will not be registered for HDD
• To record S-Video signals through the L-2 IN or INPUT F-1 connector, make sure that "DIRECT REC" is
NOTE
NOTE
"O.S.D." to "OFF" before starting.
NOTES
SCART cable. (See page 11.)
Navigation. "– – – –" will be shown for the station name.
set to "OFF"; otherwise, the recorded picture will lose colour.
•
bold
The initial setting is
in the table below.
67
Advertisement
Table of Contents
