Table of Contents
Advertisement
Searching for a programme by its title—TITLE
You can easily search for a programme or a play list if it
has its own title.
• To assign a title to a programme or a play list, see pages
36 and 39.
You can also assign a title while setting the recording
timers (see pages 41 and 43).
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press DVD/
HDD so that the HDD lamp lights.
• When using the remote control, slide the DVD/TV/
HDD selector to the right (HDD), then press ENTER.
• HDD Navigation does not work during Automatic
Satellite Recording (see page 46).
1
1
Press HDD NAVIGATION.
2
Press
to "TITLE," then press
ENTER.
3
.
Press
1
to the initial letter of the
title, then press ENTER.
• Thumbnails which have the selected initial letter in
2–5
their titles appear.
If no programmes or no play lists with the selected
letter are found, those with the next alphabetical letter
will appear.
4
Press
then press ENTER.
• The playback selection screen appears.
5
Press
2–5
(see the table below), then press ENTER.
BEGINNING
RESUME
REPEAT
NOTE
You cannot select "RESUME" for newly recorded programme
(with
To stop playback
Press 7 (CLEAR).
• When you select Repeat Play ("REPEAT"), pressing
(SELECT) cancels the repeat, and resumes normal
playback.
Show the NAVIGATION screen.
Enter the TITLE screen.
3
/ 2 /
∞
5
/
to move
Select the initial letter of the title.
/ 2 /
3
∞
5
/
to move
Select a programme to play.
/ 2 /
3
∞
5
/
to move
Start playback.
or 2 to move
3
to one of the playback modes
Select to start playback from the beginning.
Select to start playback where you have
stopped last.
Select to repeat the same programme.
Repetition continues until you stop it.
icon).
33
to a thumbnail you want,
3
Advertisement
Table of Contents
