DV300H-JN.BCANJJB_MFL62178414_ENG DVD PLAYER XV-N680B XV-N682S INSTRUCTIONS LVT2008-003A...
To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. As an E ® Partner, JVC has NERGY determined that this product or product models meet the E NERGY for energy efficiency.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. About the Symbol Display “...
• Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal) since they may result in malfunctions. • This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards.
Front Panel a 1 1 / / ' ' STANDBY/ON Switches the unit ON and OFF. b Disc Tray Insert a disc here. c Z (OPEN/CLOSE) Opens or closes the disc tray. d Display window Shows the current status of the unit. e Remote Sensor Point the remote control here.
Remote Control STANDBY/ON (1 1 / / ' ' ) Switches DVD Player ON and OFF. OPEN/CLOSE (Z) Opens and closes the disc tray. PAUSE/STEP ( X ) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. SKIP (. / >) Go to next chapter or track.
(V). Audio – Connect the left and right AUDIO OUTPUT jacks of the DVD Player to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the DVD Player’s AUDIO OUTPUT jack to the phone in jack (record deck) of your audio system.
When you use HDMI connection, you can change the resolution (480i, 480p, 720p, 1080i, 1080p) for the HDMI output. HDMI compatible TV Rear of DVD player About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices.
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use b / B / v / V to select a language then press ENTER and the confirm menu will appear.
LANGUAGE Menu Language Select a language for the Setup menu and the on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original – Refers to the original language in which the disc was recorded.
AUDIO Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
OTHERS Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitor’s ability.
Operation General Features Buttons Operations OPEN/CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by- Frame. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track.
Notes on general features: • On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 15). • If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.
Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Use v / V to select a track/file and then press PLAY (N) or ENTER and playback starts.
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. 2.
Viewing a JPEG file This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. 3.
Playing a MPEG4 Movie file This unit can play MPEG4 files. 1. Insert a MPEG4 file recording media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. 3.
Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts.
Reference Remote Control Function Remote Control C1/C2/C3 Code Switching This unit is initially set to C3 code (JVC DVD PLAYER code). You can easily change the Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Ameharic 6577 Galician Arabic 6582 Georgian Armenian...
The DVD player does not start playback. • The remote control is not pointed at The remote control the remote sensor on the DVD player. does not work properly. • The remote control is too far from the DVD player.
Specifications General Power requirements: Power consumption: Dimensions (Approx.): Net weight (Approx.): Operating temperature: Operating humidity: Outputs VIDEO OUTPUT: S-VIDEO OUTPUT: COMPONENT VIDEO OUTPUT: HDMI OUTPUT (Video/Audio): AUDIO OUTPUT: DIGITAL AUDIO OUTPUT: System Laser: Signal system: Frequency response: Signal-to-noise ratio: Harmonic distortion: Dynamic range: Accessories Video cable (1), Audio cable (1), Remote control (1), Batteries (2)