Table of Contents
Advertisement
42
Express Timer programming
If you do not know the P
programme you want to record, use the following
procedure to set the timer programmings.
• Make sure that the clock built in this unit is set
properly.
• Turn on the TV and select an appropriate input (AV)
mode.
• When using the buttons on the unit, make sure that
the HDD lamp on the unit is lit. If not, press DVD/
HDD so that the HDD lamp lights.
• When using the remote control, slide the DVD/TV/
HDD selector to the right (HDD), then press ENTER.
7
To go back to the previous screen while programming,
press RETURN.
C
number for a TV
LUS
ODE
–
2 p
5
1
2–p
1
Show the PROGRAM screen.
Press HDD PROGRAMME.
2
Select the Express Timer programming.
1
Make sure that
Press ENTER.
2
NOTE
If "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV, erase unwanted
1
programmings from memory (see page 45).
3
Set the date.
/ 2 /
3
Press
press ENTER.
4
Set the start time and stop time of the
programme.
∞
1
Press
or
ENTER.
∞
2
Press
or
ENTER.
∞
3
Press
or
ENTER.
∞
4
Press
or
ENTER.
5
Select the programme position number.
∞
Press
or
1
ENTER.
• If you want to timer-record a satellite broadcast,
press the number button "0" to change "TV PROG"
to "SAT" before pressing ENTER.
∞
2
Press
or
position number, then press ENTER.
∞
Press
to move the cursor to "CONFIRM," then
3
press ENTER.
6
Select the recording speed.
∞
Press
or
1
ENTER.
∞
Press
or
2
ENTER.
TIMER RECORDING (cont.)
is pointing at "PROGRAMME."
∞
5
/
to move
to the desired date, then
5
to move
to "START," then press
5
to select the desired time, then press
5
to move
to "STOP," then press
5
to select the desired time, then press
5
to move
to "TV PROG," then press
5
to select the desired programme
5
to move
to "REC MODE," then press
5
to select the desire mode, then press
Advertisement
Table of Contents
