Connecting To A Satellite Receiver - JVC LET0239-001A Instructions Manual

86
Connecting to a satellite
receiver
Simple Connections
This is an example of simple connection if your TV has a
21-pin AV input (SCART) connector.
Connect the satellite receiver to the L-2 IN connector,
then connect the TV to the L-1 IN/OUT connector.
Satellite cable
Satellite receiver
Mains outlet
IMPORTANT:
When you set "L-2 SELECT" to "SAT" (see page 68)
You can view a satellite broadcast on the TV (with its input (AV) mode correctly selected) without turning on this
unit.
To view a satellite programme while this unit is turned on, press TV/VIDEO with the DVD/TV/HDD selector set to
the right (HDD) so that the VIDEO lamp inside the front panel goes off.
• If you turn on this unit when the satellite receiver is turned off, no picture appears on the TV. If this happens,
perform one of the following:
- To watch a satellite programme, turn on the satellite receiver.
- To watch TV, select a desired programme position on the TV.
- To watch a TV programme through the HDD deck, press TV/VIDEO so that the VIDEO lamp inside the front
panel lights.
Outdoor unit
XV-DDV1SL
EXTERNAL COMPONENT OPERATIONS (cont.)
NOTES
• Be sure to use a 21-pin SCART cable (not an S-Video cable) for
the satellite receiver connection.
• Set "L-2 SELECT" to "A/V" (see page 68).
• You can use Automatic Satellite Recording (see page 46) with
this connection.
• To record a programme via the satellite receiver, select "L-2"
by pressing AUX (number button "0") and/or HDD/TV PR +/–.
"L-2" appears in the display window.
• For details, refer to the instruction manual of the satellite
receiver.
Aerial
Aerial connector
TV aerial cable
ANTENNA
IN
ANTENNA
OUT
21-pin SCART connector
DVD/HDD DVD L-1
VIDEO AUDIO VIDEO SIGNAL
DVD DIGITAL OUT OUT OUT SELECTOR
VIDEO LEFT
PCM / STREAM
COAXIAL OPTICAL COMP.
L-2
Y / C
/ RGB
S-VIDEO
RIGHT
TV
IN/OUT
IN
SAT CONTROL
IN
OUT
AV
ANTENNA
COMPU LINK