JVC LET0239-001A Instructions Manual page 90

90
DO YOU WANT TO DELETE
SELECTED INDEX PICTURE?
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
PROGRAMME COMPLETED
CHECK PROGRAMME LIST TO CONFIRM
NO PROGRAMME TO PLAYBACK
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
PLEASE ADJUST CLOCK BEFORE TIMER
PROGRAMMING
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
PROGRAMME NOT COMPLETED
PROGRAMME OVERLAPPED
PLEASE CONFIRM AND MODIFY
PROGRAMMING NOT COMPLETED
EXIT?
REMAINING CAPACITY IS SMALL
DELETE UNWANTED PROGRAMME FROM HDD
TITLE MEMORY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD
UNABLE TO GO BACK ANYMORE
UNABLE TO GO FORWARD ANYMORE
UNABLE TO SET TIMER PROGRAMME
DUE TO SHORTAGE OF CAPACITY
DELETE UNWANTED PROGRAMME FROM HDD
MESSAGE
ADDITIONAL INFORMATION (cont.)
DESCRIPTION
Appears when you have tried to delete a programme
from the HDD. Make sure you really want to delete the
programme. (See page 36.)
To use the VIDEO P +
LUS
Guide Program number in advance. (See page 69.)
Timer programming is completed properly.
There is no recorded programme in the HDD.
An invalid P C number is entered.
LUS ODE
To set the timer programming, set the built-in clock in
advance. (See page 69.)
You can store 16 timer programmings. To store a new
programming, erase an unnecessary programming. (See
page 45.)
The timer programming you set is overlapping with
another timer programming.
Appears when you stop setting timer programming.
The remaining capacity of the HDD is short for the
current recording.
You have already stored 100 programmes in the HDD.
The recording cannot be started even though the capacity
for the recording is enough.
You cannot go back beyond the start point of the
recording.
You cannot go forward beyond the end point of the
recording.
There is not enough memory in the HDD for recording.
To increase the free space, delete the unwanted
programmes. (See page 36.)
®
system for timer recording, set