JVC LET0239-001A Instructions Manual page 64

64
Basic operations
Use the following buttons to operate a JPEG disc.
3 (SELECT):
Starts slide show while stopped or
paused.
7 (CLEAR) or MENU: Stops slide show.
8 or ENTER:
Keep showing the same picture.
4/¢:
Skips back or forward a file during
slide show.
NOTES
• The unit supports the baseline JPEG format.
• The unit does not support "packet writing (UDF format)" discs.
• The unit supports discs recorded with multiple sessions.
• The unit may not be able to read some discs, or may take a
long time to display a picture in the disc, due to disc
characteristics, recording conditions, or numbers of groups
(folders), etc.
• Program Play and Random Play cannot be used for JPEG discs.
• Screen Saver will be activated if the same picture is displayed
for more than 5 minutes.
• The unit only can play back files with the following file
extensions; ".jpg," ".jpeg," ".JPG," ".JPEG" and any other
combination of upper case and lower case letters (such as
".Jpg").
• If a JPEG file name includes any 2-byte character, the unit may
not show the file name correctly.
• If a picture has been saved at greater than 640 x 480 pixel
resolution, it may take some time to display the picture.
• The unit does not support pixel size of more than 2400 pixels
in horizontal resolution. Make sure that the horizontal
resolution of the picture pixel size is 2400 pixels or less.
Operations using the JPEG CONTROL screen
When inserting a JPEG disc, the JPEG CONTROL screen
automatically appears on the TV.
JPEG CONTROL
Group : 01 / 10
spring
summer
fall
winter
sea
mountain
camp
picnic
skiing
flower
Selected group
Group column
You can specify the desired group/file from the JPEG
CONTROL screen using the following procedure.
File : 01 / 06 (Total 28)
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
Files in the
currently selected
group
MP3/JPEG OPERATIONS (cont.)
ENTER
CLEAR
SELECT
• When using the buttons on the unit, make sure that
the DVD lamp on the unit is lit. If not, press DVD/
HDD so that the DVD lamp lights.
• When using the remote control, slide the DVD/TV/
HDD selector to the left (DVD), then press ENTER.
3
4 / ¢
MENU
ENTER
Number
GROUP/TITLE
MENU